Vertical DXP Plus Manual de instrucciones

Digital Communications SystemProgramming InstructionsThis publication reflects softwarereleases through 2.A.Printed in U.S.A.COMDWmIMI66-123.018195

/M/66-123DXP Plus Programming Instructions1.3Performing The Login ProcedureOnce you have loaded the VMMI software using the Section 1.2 discussion, yo

DXP Plus Programming InstructionsIMl66-1237.1.44Restrict A RS Hookflash(Automatic Route Selection, Hookflash Restriction)Description:This feature enha

/M/66-123DXP Plus Programming lnsfrucfisns7.1‘46Enhanced LCD DisplayDescription:Take this programming action to enhance the display of an LCD-equipped

DXP Plus Programming instructions7.2Programming Station FeatureslMl66-1237.2.1Personal lnfercom NumberDescription:Use this programming procedure to ch

/M/66-123BXP Pius Programming Instructions7.2.3Class Of ServiceDescription:Programming:You can assign a group of preprogrammed class of service statio

DXP Plus Programming instructionsIMB-1237.2.5Idle Line PrioritvDescription:If you use Section 7.1.14 to give a station the ability to automatically co

7.2.7Group Intercom AccessDescription:Use this procedure to add group intercom numbers to stations for their use. Also refer toSection 7.3 to map butt

DXP Plus Programming InstructionsIMIH-1237.2.8Prime Line ProgrammingPrime Line TypeDescription:When you enable this feature, the station automatically

/M/66-723DXP PIUS Pfogramming InstrwctionsPrime Line GroupDescription:Use this procedure to choose the prime line group.Programming:1. Press CONTROL T

DXP Plus Programming InstructionslMl66-1237.2.9Tone Or Voice Signalling (Tone First)Description:Intercom calls are either tone or voice signalled as a

/M/66-123DXP Plus Programming instructionsZ2. IIDefault Forward TypeDescription:Use this procedure to arrange the call forward default scheme for ind

1.4ReLoading Or Up-Grading The System SoftwareThe DXP Plus includes system software when it ships from the factory. At initial system installation,you

DXP Plus Programming InstructionsIMIW-1237.2.12Forward RNA Ring Busy (Enhanced Call Forwarding)Description:The call forward feature allows a station u

7.2.13Flexible Ringing AssignmentsProgram ringing assignments on a per station/per line/per intercom number basis.Ringing can be immediate,delayed, or

DXP Plus Programming Instructions/M/66-123Day 1 RingDescription:Use this procedure to choose the line ports that you want to ring at stations during t

Day 1, Day 2, And Night Ringing Begin And End TimesDescription:With this programming procedure, set the begin and end times of the day 1, day 2, and n

Caller ID Ring No-Answer (RNA)Description:This feature offers telephone users the ability to review calls that ring at their stations whilethey are aw

Personalized Ringing ToneDescription:Program a station to ring in one of several distinctive tones for proprietary digital telephonesand in one of fou

7.2.15Service Observable (Service Observing)This feature allows a station to enter an in-progress call in an unannounced, muted mode to monitor thecon

/M/66-123DXP Pius Pfogfamming Instructions7.2.16Day Exception Number/Night Exception NumberDescription:Exception numbers allow stations to dial number

7.2.18SOHVA GroupsDescription:SOHVA calling groups control the pattern in which station ports receive and/or originateSOHVA calls to one another. You

/M/66-123DXP Plus Programming Insfrwetions7.2.20Pick-L/x, GrcxmsDescription.=Use this procedure to place a number of stations in a call pick-up group

ItW66- 123DXP Plus Programming Instructions1.5Using VMMI Software To Translate A DXP DatabaseYou can use the VMMI software to translate the database r

7.2.22Single Line TAP (Single Line Proprietary Telephone TAP Button)Description:Use this procedure to set the function of the TAP button on single lin

7.2.24Allow Ringer Off (Ringer Volume Off)Description:On some proprietary telephones, the user selects the ringer volume level by pressing arocker-typ

7.2.26Consoles Installed (DSS/BLF Consoles Installed)Description:Use this procedure to assign DSS/BLF consoles to a station and to identify the ports

/M/66-123DXP Plus Programming hstructions7.2.28Automatic Transfer On BusyDescription:You can enable automatic attendant transfer on busy for individua

7.2.30A ttendan t Position (Alternate. Ovetflo w)Description:The attendant position station provides incoming call direction, and controls system-wide

lMl66-123DXP Plus Programming instructions7.2.31Extended DTMF DialingDescription:You can enable the extended DTMF length dialing feature on a per stat

Uvll66-1237.2.32Softkeys Setup (Interactive Button SuppotfjDescription:The system provides support for interactive buttons on LCD LJTroduct codesof 70

/M/66-323DXP Plus Programming hstructions7.2.33/ST Hold ConfirmationDescription:Industry-standard telephones sound a special hold confirmation tone wh

DXP Plus Programming Instructions/M/66-1237.2.35Industry-Standard Telephone SupportThe DXP plus digital communications system supports the use of indu

lMl66-123DXP Pius Programming InstructionsIST DTMF Receiver TimeoutDescription:You can program the amount of time that the system waits to receive a D

Saving the DXP DafabaseNOTE: This programming procedure details steps that one follows when using the communications softwareprogram known as PROCOMM

DXP Plus Programming Instructions/M/66-123IST Flash TimeDescription:You can program, on a system-wide basis, the timed length of the signal that resul

IM166-123DXP Plus Programming hstructionsIST Ringing On BusyDescription:You can program industry-standard telephones to provide a ringing on busy sign

DXP Plus Programming Instructions/M/66-123IST Ringing PatternsDescription:You can program the ringing pattern for either IST ring mode one or IST ring

iMl66-123DXP Plus Programming Instructions7.3Button Mapping By Station (Square/Non-Square System)Description:Programming:The system assigns certain fu

7.3.1Feature Mnemonic ListACCTALTRNANSWERAPACEARDARECDARINGAUTHBOTHCAMPCIDDNDDPKUPDSTATEXOVRFEATRFWD-AFWD-PFWDRAFWDRPGPLSNGPKUPHDSTHOLDITCMI####LCDMSL

/M/66-123DXP Pius Programming fnnstructions7.4Phone Types (Telephone Types)Description:This programming feature allows you to identify the particular

7.5Copy Model COS, Station, Button Map (Block Programming)7.5.1Block Programming, Class-Of-ServiceDescription:Program some or all class-of-service cat

lMl66-123DXP Plus Programming Instructions7.6Station HuntingDescription:Station hunting is a feature that becomes available to DXP Plus users with sof

DXP Plus Programming InstructionslMl66-123NameDescription:The hunt group’s name is the seven character alpha-numeric name of this group that is used f

lMl66-123DXP Plus Programming hstructionsSearch Type (Type of Hunting)Description:There are several distinct types of station hunting.Terminal Hunting

/M/66-123DXP Plus Programming Instructions1.5.2Translating The DXP Data Base1.2.3.4.5.6.Turn on your PC and load the Windows software.Select the VMMI

DXP Plus Programming InstructionslMl66-123Direct RingDescription:Use this procedure to choose the line ports that you want to ring at a station hunt g

lMl66-123DXP Pius Programming hstrwdionsDay 1 RingDescriptionsUse this procedure to choose the line ports that you want to ring at stations during the

DXP Plus Programming instructions/M/66-123(c) The VMMI program presents a screen graphic that depicts the boards installed in a defaultarrangement in

1.6UsinVMMI Software To ArchiveAndiiestore The Data BaseYou can use the VMMI software to archive and restore the DXP Plus database. To archive and res

DXP Plus Programming InstructionslMl66-1231.7UsinVMMI Software To PerformTheiioard ConfigurationYou can use the VMMI software to program the DXP Plus

lM166-123DXP PIUS Programming hstructions1.6Configuring The Windows Terminal EmulationWhen configuring the terminal emulation program so that it can c

DXP Plus Programming InstructionslMi66-123Reviewing GeneralProgramming ConsiderationsSince the programming procedure is menu driven, you should consid

CERTIFBECIS0 sooaCorndial’s Quality Management System 1sCertified To The IS0 9001 Standard.AtoZ KELLATRONICS, INC,ii

3Understanding Keyboard AndTerminal Definrtions3.1Reviewing The Keyboard DefinitionsThe following list describes the functional keys on the keyboard.l

/M/66-123DXP Plus Programming Instructions3.2Reviewing The Control Key DefinitionssThe following list describes the control key functions. Unless othe

DXP Plus Programming Instructions/M/66-123Reviewing The Command4Prompts and Error Reporting4.1Reviewing The Command PromptsThere are four different ty

Performing The TerminalEmulation ProgrammingOnce successfully entered, the programming mode causes your PC to display a welcoming menu. From thewelcom

5. IReviewing The Programming ProgressionProgram the system in the sequenceshown in the following flow diagram.Determine system programmmgparameters.

DXP Plus Programming Instructions/M/66-123Programming System Featuresl Default Functional Programming...6.1l TerminalSetup...

lM166-123DXP Plus Programming Instructions6. IDefault Functional Programming6.1.1Master ClearDescription.=Programming:The master clear feature in an o

6.1.2System DefaultDescription:The system default sets the system configuration features to the default operating parameters.When the system default i

6.1.5Bufton Mar, DefaultDescription.=Every programmable button at each telephone connected to the system provides line selection,direct station select

6.1.8DID Translation Table, DefaultDescription:If you have programmed translation tables for DID use (Section 8.4.4), you can clear them withthis proc

Table Of Contents1Understanding General Programming Information1.0Determining Your Equipment Needs1.1Connecting The PC To The DXP PZus1.2Installing Th

IMl66- 123DXP Plws Programming Instructions6.1.11Software ResetDescription:You can reset the system software with this procedure. Resetting the softwa

6.3Messaging6.3. ILCD MessagingDescription:This procedure enables a class of service messaging feature. It allows station users to set amessage at the

/M/66-123DXP PIus Programming Instructions6.3.2Message Deposit (Response Messaging)Description:This procedure enables a class of service messaging fea

Serial Port (Serial Data Port Parameters)Description:The DXP Plus provides two serial data ports on the CPU board and dedicates them to PC-basedprogra

/M/66-123DXP Plus Programming Instructions6.4. IMatching Serial Data Port NumbersTo Communications Card LocationsDescription:You must take this progra

DXP Plus Programming InstructionsIMl66-1236.5 Subdued Off-Hook Voice Announce(SOHVA) Programming6.5. IBusv On SOHVADescription:At default, the system

/M/66-123DXP Plus Programming Instructions6.5.3SOHVA GroupsDescription:SOHVA calling groups control the pattern in which station ports receive and/or

DXP Plus Programming InstructionslMl66-1236.6Speed Dial Programming6.6. IPause TimeDescription:During speed dialing, it is sometimes necessary to have

/M/66-123DXP Plus Programming hstructions6.6.3Speed Dial SetsDescription:A speed dial set is a group of 10 speed dial locations. The system allocates

DXP Plus Programming InstructionslMl66-1236.7System Clock (Time and Date)Description:The system clock provides time and date information for display o

/M/66-123DXP Plus Programming Instructions6Programming Sysfem Features6.16.26.36.46.56.66.76.86.96.106.116.126.13Default Functional ProgrammingVDT Dis

6.8.3Camp-On ToneDescription:Use this procedure to set the duration of the camp-on tone that the system sends to a busystation. Also refer to Section

DXP Plus Programming lnsfructions/M/66-1236.8.5Timed Recall (Held And Transferred Calls)Attendant Hold RecallDescription:After a call has been on hold

/M/66-123DXP Plus Programming Instructions6.8.6Paging AccessDescription:If you have assigned a paging zone and given that zone access to external pagi

DXP Plus Programming Instructions/M/66-1236.8.9Periodic Tone TimeDescription: After you enable the periodic warning tones that remind users to keep co

/M/66-123BXP Plus Programming Instructions6.8.12Line-To-Line Connect DurationDescription:After you have given a station the ability to set up an unsup

6.8.15Authorization Code TimeoutDescription:Use the Section IO.5 procedure to enable the authorization code feature. Once a user uses theauthorization

/M/66-123DXP Plus Programming Instructions6.8.18/ST Flash TimeDescription:Programming:You can program the timed length of the signal that results when

6.8.20Pulse Dial lnterdiait TimeDescription:You can set the interdigit time between dial pulses when the system pulse-dials a number over aline. The D

/M/66-123DXP Pius Programming Instructions6.9Svsfem Parameters6.9. ISvnchronized Rinuin~Description:The system can provide an audible distinction betw

DXP Plus Programming instructions/M/66-1236.9.3A utomafic Roufe Selection (A RS Enable)Description:You can enable or disable automatic route selection

DXP Plus Programming Instructions/M/66-12310 Programming Call Costing and Station Message-Retail Accounting and Reports (SMDABMDR Programmingj10.1 SMD

/M/66-123DXP Plus Programming hstructions6.9.5Toll A RS Dialing PauseDescription:To create toll restriction parameters for the system, program restric

6.9.7TI--El Siatus ReportingDescription:Use the following instructions to enable the Tl--El status reporting feature. Use the Section6.13.2 procedure

lMl66-123DXP Plus Programming Instructions6.9.9Central Message DeskDescription:Use this procedure to designate one station as the central message desk

6.9.12/ST Ring FrequencyDescription:The system will allow you to set a ring frequency of 25 Hz for international applications or set aring frequency o

lMl66-123DXP Plus Programming Instructions6.9.14Line Disconnect Automatic Camp-OnDescription:If a user at a current station selects a line that a prev

DXP Plus Programming Instructions/M/66-1236.9.15Automatic Station RelocationDescription:The system will automatically recognize a particular station s

lM166-123DXP Plus Programming Instructions6.9.16Defaulf Relocaiion ResponseDescription:When someone relocates a digital telephone from one station por

DXP Plus Programming InstructionslMl66-1236.9.18Day I, Day2, and Night Ringing Begin and End TimesDescription:With this programming procedure, set the

/M/66-123DXP Plus Programming Instructions6.9.19Services DTMF HighwayDescription:The DXP Plus system allows the use of on-premise industry-standard te

6.10Paging Programming (Paging Zones)6.10.1Zone Programming(Zone Names, Transmit Stations, Receive Stations)Description:Use this programming procedure

/M/66-123DXP Plus Programming Instructions14Programming For Peripheral Devices14.1Caller ID Programming14.2Tracker Paging System Programming14.3Digita

/M/66-123DXP Plus Programming Instructions6.10.3Paging TransmitDescription:Use this procedure to give a class of service of stations the ability to tr

6.70.6Relays (External Paging Equipment Control)Description:If your installer connects customer-supplied external paging equipment to the system’s ext

6.10.8Common Audible Ringer (Common Audible Ringer Inferface)Description:If your installer connects customer-supplied external paging equipment to the

DXP Plus Programming Instructions6.11Change Password (Password Programming)lM166-123You can use this programming procedure to change the program entry

/M/66-123DXP Plus Programming Instructions6.11.1Changing The PasswordDescription:To change the password, follow this procedure.Programming1~ Press CON

DXP Plus Programming InstructionslMl66-1236.12Feature RenumberingDescription:Dialing codes for user features are flexible so that you can renumber the

6.13Programming The T&-El ParametersDescription:When the system is using the Tl--El option, you can program status and alarm alertingparameters. A

DXP Plus Programming Instructions/M/66-1236.13.2Programming The T&-El Siatus Log ParametersDescription:Use the following instructions to program t

/M/66-123DXP Pius Programming Instructions6.13.4Assigning A System Status Button To A StationDescription:Use the following instructions to program a s

6.13.7Pad Level-Transmit, Receive(Gain And Attenuation Settings For Line Transmit And Receive)Description:This feature enhances the DXP Plus Tl--El di

Understanding GeneralProgramming InformationI.0Determining Your Equipment NeedsProgram the DXP Plus digital communications system from a personal comp

DXP Plus Programming InstructionslMl66-12371Programming Station Featuresl Programming Class Of Service Features . . . . . . . . . 7.1l Programming S

lMl66-123DXP Plus Programming Instructions7. IProgramming Station Class Of Service Features7.1.1Account Codes (Forced with Positive Verification)Desc

7.1.2Automaiic HoldAutomatic Hold On Intercom NumberDescription:The system automatically places a current inside call on hold when a station user pres

7.1.3Background MusicDescription:Music or other supplied audio information is available at a station through the telephone speakerand is turned on or

7.1.5Call ForwardCall Forward Of All, Personal, Busy, or Ring-No Answer (RNA) CallsDescription:Use this procedure to give users of an entire class of

/M/66-123DXP Plus Programming InstructionsCall Forward RNA, Ring (On) Busy (Enhanced Call Forwarding)Description:The call forward feature allows a sta

DXP Plus Programming instructionsIMIW-123Call Forward, Default Forward Type (For Busy Or Ring-No Answer Calls)Description:Use this procedure to arrang

lMl66-123DXP Phs Programming Instructions7.1.6Call ParkCall Park AccessDescription:Access to call park enables the station user to place as many as ni

DXP Plus Programming Instructions/M/66-1237.1.7Call Pick-LJDCall Pick- Up, EnableDescription:A station user can dial a code plus an intercom number of

IMl66-123DXP Plus Programming instructions7.1.6Call Waiting (Tone)Description:Use this procedure to provide a station with the ability to send a tone

IM166-123DXP Plus Programming Instructions1.1Connecting The PC To The DXP PlusConnect the serial data port of the PC to the maintenance port of the DX

DXP Plus Programming InstructionslMl66-1237.1.10Camp-On ProgrammingCamp-On Originate, Camp-On Receive (Camp-On/Call Back)Description:If a busy tone or

lMl66-123DXP Plus Programming Instructions7.1.11Do Not Disturb ProgrammingDo Not Disturb InhibitDescription:This feature prevents a station from enter

7.1.12Exclusive HoldDescription:When you enable this feature, it prevents a telephone user at one station from picking up a callthat someone placed on

/M/66-123DXP Plus Programming Instructions7, 1.14Idle Line ProgrammingIdle Line PreferenceDescription:With you enable this feature, a station automati

DXP Plus Programming InstructionslMl66-1237.1.15/ST Distinctive RingingDescription:An industry-standard telephone can sound one ring cadence for inter

/M/66-123DXP Plus Programming Instructions7.1.17Meet Me Answer PageDescription:When you enable this feature at a station, its user can dial a code in

DXP PIUS Programming /nstructionslMl66-1237.1.20Music On Intercom Hold (Music Or Tone On Hold)Description:Programming:With this feature enabled, the s

/M/66-123DXP Plus Programming Instructions7.1.21Paging ReceiveDescription:Use this procedure to give a class of service of stations the ability to rec

7.1.23Ringing Preference (Ringing Line Preference)Description:When you enable this feature, a station can automatically connect to a ringing line when

/M/66-123DXP Pius Programming Instructions7.1.25Day Restriction Level/Night Restriction LevelDescription:Use restriction level programming (Section 11

DXP Plus Programming InstructionsIlW66-1231.2Installing The VMMI Software ProgramThe VMMI software is your entry to the DXP Plus system. Before you ca

7.1.27 Station MonitoringDescription:When you enable this feature, the busy lamp field (BLF) light of an associated direct stationselect select (DSS)

/M/66-123DXP Plus Programming Instructions7.1.29Remote Station DisableDescription:The remote station disable feature, when enabled, allows users at st

7.1.31Line AnswerDescription:This feature provides station access to a line for call answering purposes for an entire class ofservice of stations. Als

lMl66-123DXP Pius Programming Instructions7.1.33Periodic Line ToneDescription:This when enabled, provides periodic warning tones to station users whil

7.1.34Maximum Call DurationDescription:The system provides the maximum call duration feature. This feature, when enabled,automatically cuts off calls

lMl66-123BXP Plus Programming Instructions7.7.35Line Group AccessDescription:Use this procedure to give a station access to line groups. Refer to Sect

7.1.37Line-To-Line Transfer (Unsupervised Conference)Description:This programming feature gives a station the ability to set up an unsupervised confer

/M/66-123DXP Plus Programming Instructions7.1.36Voice Announce BlockDescription:When you enable this programming feature a station has the ability to

7.1.40 Forced Account CodesDescription:After you have enabled the account code feature for the system, set its parameters, andprogrammed its list of a

/M/66-123DXP Pius Programming instructions7.1.42Clear Major Alarm RingDescription:This feature allows users to clear the major alarm ring condition fr